Staubli

Зарегистрированных посетителей: 7705

Информация

Журнал

ВЫПУСК №5 2012
Просмотр выпуска
АРХИВ НОМЕРОВ | ПОДПИСКА



В следующем номере:

Тема номера: Разнообразный мир оснастки

Полимерные шахтные колодцы, изготавливаемые литьем под давлением
Р. Бауер
Такие системы инфраструктуры как теле- и электрокоммуникации, тепловые сети или сети для подвода свежей воды и отвода сточных и дождевых вод являются жизненно важными артериями городских поселений. Проложенные, как правило, под землей и потому не видимые глазу, они проявляют себя только в случае возникновения каких-либо нарушений в эксплуатации, тре-бующих их ремонта или реконструкции. Полимерные материалы в этом секторе успешно конкурируют с бетоном и другими строительными материалами. Описывается конструкция крупногабаритной литьевой оснастки для производства полимерных шахтных колодцев.

Компьютерная программа для расчета себестоимости изделий на этапе проектирования литьевой формы
Г. Шоуенберг
На стадии проектирования литьевой формы и собственно литьевых изделий из полимерных материалов сначала необходимо добиться выполнения предъявляемых к ним технических требований. Однако при продолжении работы над проектом следует как можно раньше определить объем связанных с изготовлением нового изделия затрат, что требует достаточно многих допущений. Точность калькулирования затрат на подготовительном этапе выполнения проектов повышается при уменьшении общего числа допущений и придании расчетным параметрам более достоверных значений. Описывается алгоритм проведения подобных расчетов.

ЧИТАЙТЕ ДАЛЕЕ

Новости отрасли


Мероприятия



Рейтинг@Mail.ru
Rambler's Top100

Еnglish


Polymer materials. Products, equipment, technology magazine

Specialized monthly magazine Polymer materials. Products, equipment, technology is published since 1999 and is intended for production managers, engineers and technologists involved in manufacture and processing of all polymer material grades in the Russian Federation and CIS countries. The magazine presents information on advanced technologies and modern equipment, conditions and development tendencies of the Russian and world industrial markets.

The magazine has been created in order to render information support to the readers in their professional activities. It publishes information on advanced technologies and modern equipment, conditions and development tendencies of the Russian and world industrial markets.

In 2005 a cooperation agreement was signed with the leading European professional edition KUNSTSTOFFЕ, Germany. Every month a special insert in our magazine acquaints the readers with new achievements of the European, and German in particular, machine building in the field of polymer material processing.

Among our authors are leading Russian and foreign specialists who discuss issues of the day concerning application of modern equipment, production technology for manufacture of a wide range of polymer products, application of various grades of raw materials and semi-finished products to manufacture a wide spectrum of products using processed polymer materials.

The audience of the magazine:
producers of granulate, polymer sheets, foam plastic material, plasticizer, polyamide, polyvinylchloride, polycarbonate, polymer fiber, polyolefine, polypropylen, polystyrene, polyuretan, polyethylene, thermosetting plastic material, resins, thermoelastoplastic material, polymer pipe, polymer profiles and suppliers of equipment and tooling, raw materials and semi-finished products.

Our magazine has its own web-site (www.polymerbranch.com) that is not merely an electronic version of the hardcopy but offers a wide range of information resources and services to our visitors.

Besides an electronic version of the last issue you can also learn of the next issue topics and see the archive of our publications. You can also make you subscription for all our editions here.

Sites of all our publishing house editions are interactive so after completing a simple registration and authorization procedure every visitor can, for example, place an article on the site, ask professional questions, participate in a forum and exchange opinions with other forum visitors. Our forums offer an excellent opportunity for communication. Easily obtaining any available information, you can also make your voice reach other members of the professional community.

Polymer materials. Products, equipment, technology magazine is distributed by subscription and by direct mail on the whole territory of the Russian Federation and CIS countries. Circulation in 2006 is 4000 copies. Volume is not less than 64 pages. Frequency -12 issues annually. Subscription index in Russia and CIS countries - 40871 in the Pressa Rossii catalogue.
For subscription also contact the editors' at (499) 267 03 80, 263 29 91
E-mail: podpiska@vedomost.ru

CONTACT INFORMATION
ZAO «Otrasleviye vedomosty»
PO Box 211 Moscow 105066, Russia
Tel. +7 (499) 267 40 10, 267 40 15


READER AUDIENCE
DISTRIBUTION BY PROFESSIONAL PROFILE
Products 38 % Equipment, molds and tooling 27 % Polymer materials and rubbers 19 %
Fillers and additives 7 % Service and education 7 % Adhesives 2 %


READER AUDIENCE
DISTRIBUTION BY FEDERAL TERRITORIAL REGIONS
Central Region 53 % Ural Region 4 % North-West Region 12 %
Siberian Region 7 % Volga Region 15 %
Far East Region 1 % Southern Region 8 %


DISTRIBUTION PATTERN
Direct mail 63 % Authors and research organizations 3 % Exhibitions and fairs 16 %
Subscription 15 % Advertisers 3 %


EDITORS
Chef-editor, Prof., Dr. Victor Goncharenko
Victor-gonchar@mail.ru
Editor, Dr. Oleg Mikhasenok


ADVERTISING MANAGER
Julia Nechupas
nechupas@vedomost.ru


OUR ADVERTISERS
BASF SE, Bayer MaterialScience, LANXESS AG, SIBUR, Gazpromneft, ENGEL, Sumitomo (SHI) Demag
battenfeld-cincinnati, Koch-technik, TEXTIMA, Schnorr fon Carolsfeld, BALITEH, Formotronik. VIVTECH, Hai-tian etc.


CONTACT INFORMATION
ZAO «Otrasleviye vedomosty»
PO Box 211 Moscow 105066, Russia
Tel. +7 (499) 267 40 10, 267 40 15
e-mail: info@vedomost.ru


ADVERTISING RATES
Position Size, mm Cost, Euro
Second cover 178x264/215x307 2 000
Third cover 178x264/215x307 1 750
Fourth cover 178x264/215x307 2 000
1 page 178x264/215x307 1 400
1/2 page hor./vert.178x130/87x264 750
1/3 page hor./vert.178x86/57x264 600
1/4 page hor./vert.178x63/87x130 460
Paid information, 1 page 1 100
Paid information, 1/2 page 700


Topical issues Polymer Materials Magazine 2011
MonthMain topic of the issue
JanuaryInjection moulding
FebruaryThe market of polymer materials
MarchFrom elastomeres to composites
AprilThe lightweight structures from polymer materials
MayPolymer packing: manufacture and recycling
JuneInnovations in moulds manufacture
JulyMultipurpose polymer materials
AugustPolymer materials in transport manufacture
SeptemberThe equipment: trends and innovations
OctoberConstruction polymer materials
NovemberModern extrusion technologies
DecemberNew achievements of the plastic industry


Topical issues Polymer Materials Magazine 2012
MonthMain topic of the issueInternational exhibitions
JanuaryInjection mouldingINTERPLASTIKA
Moscow, 24.-27.01.2012
FebruaryLightweight structuresCOMPOSITE-EXPO
Moskau, 28.02.-01.03.2012
POLYURETHANEX
Moskau, 28.02.-01.03.2012
MarchRecycling FTIRES & RUBBER
Moskau, 17.-20.04.2012
MOSBUILD
Moskau, 02.-05., 10-13.04.2012
AprilSpecial plastics
MayPackagingROSMOULD
Moskau, 18.-21.06.2012
ROSPLAST
Moskau, 18.-21.06.2012
ROSUPACK
Moskau, 18.-22.06.2012
JuneMoulds and dies
JulyMultipurpose plastics INTERNATIONAL CHEMICAL ASSEMBLY (ICA)
Moskau, 23.-26.10.2012
PLASTICS INDUSTRY
Moskau, 23.-26.10.2012
AugustQuality and quality control
SeptemberSuccesses of the plastic industry
OctoberAdditives
NovemberPeriphery equipmentINTERPLASTICA
Moskau, Januar 2013
DecemberProcess equipment


Последние темы форума

Экономия сырья
(Сообщений: 3, последнее: 15.05.12 15:27)

Стрейч - ПДВ - что это?
(Сообщений: 4, последнее: 12.05.12 10:27)

Дисковый экструдер!
(Сообщений: 1, последнее: 08.05.12 16:35)

[ ПЕРЕЙТИ В ФОРУМ ]

Опрос

Какой метод переработки полимеров вы используете?

 Литье под давлением
 Экструзия
 Прессование
 Термоформование
 Другое


[ ОТВЕТИТЬ ]

АРХИВ ОПРОСОВ

Контактная информация

105066, Москва,
Токмаков пер., д. 16, стр. 2

Телефоны:

8 (800) 200-111-2 (звонок бесплатный)
+7 (499) 267-38-22

Реклама: +7 (499) 265-50-35

Отдел подписки: +7 (499) 267-40-10
+7 (495) 514-21-06
+7 (499) 265-57-27 (факс)

E-mail: info@polymerbranch.com


О ПРОЕКТЕ  |  ЖУРНАЛ  |  ПОДПИСКА  |  РЕКЛАМА  |  АВТОРАМ  |  ОТЗЫВЫ  |  СПЕЦПРОЕКТЫ  |  Новости сайта  |  Новости  |  Новости компаний  |  Ссылки  |  Доска объявлений  |  Каталог полимеров  |  Переработка термопластов  |  Цены на полимеры  |  Обзор рынка  |  Словарь  |  Глоссарий  |  Предприятия  |  Документы  |  Литература  |  Мероприятия  |  Работа  |  Ссылки  |  Форумы

c 2008 Издательский дом «Отраслевые ведомости». Все права защищены
Копирование информации данного сайта допускается только при условии указания ссылки на сайт

Fri, 18 May 2012 09:29:38